FiiO has announced the R7 R2R, a desktop unit combining a network player, digital-to-analogue converter and headphone amplifier. The Chinese launch took place on 7 November 2026, with an official price of CNY 5,499. That price applies to the Chinese market and should not be read as an Italian or European retail price.

The appeal is having the source and the functions needed to connect headphones or an audio system in one unit. The R7 R2R can also work as a digital transport, preamplifier and USB DAC. In USB DAC mode, it receives audio from a computer, making it a possible destination for an existing player without requiring the whole library to move to another system.

Android and R2R conversion

FiiO lists Android 13, a Snapdragon 680, 8 GB of RAM and 128 GB of internal storage. Conversion uses a proprietary 24-bit R2R array with 192 precision resistors.

R2R is a digital-to-analogue conversion architecture that uses a resistor network to turn digital samples into an analogue signal.

Reading the 4 W figure alongside the headphones

FiiO specifies up to 4,000 mW per channel from the balanced output, with five gain settings. That maximum does not describe the power available into every load and should not automatically be applied to the single-ended output. Headphone impedance and sensitivity also matter when matching an amplifier; our headphone guide explains how to read them together.

Gain is not the same as power: it expresses the ratio between output and input signal levels. Choosing a setting appropriate to the headphones helps retain a usable volume range, rather than starting with the highest gain by default.

The model’s attraction lies in bringing several audio paths together in one device. Before buying, check the connections your system needs, application compatibility and availability in your country.

Sources

Report a correction ↗